 |
AR-10 .308 BOLT CARRIER GROUP DPMS GEN 1 BCG - MELONITE NITRIDE
Melonite Nitriding treatment turns a standard chrome moly steel barrel into a very slick, hard and corrosion resistant barrel. Unlike chrome lining, the Melonite process is a treatment done to the surface instead of adding a layer of material. This treatment is done to both the inside and outside of the BCG. The slick surface will never peel, is thicker than chrome lining, will not negatively affect accuracy as chrome lining does and will reduce the amount of friction created. Less friction equals less bore surface wear which will extend the barrel life. Another added benefit is carbon does not easily adhere to this surface making your cleaning job that much easier. This technology has been used by Glock, Springfield and Heckler & Koch for years and is gaining popularity as more companies are offering their products with this treatment.
- Melonite Nitrite Treated
- Bolt: MPI Tested Heat Treated and Shot Peened 9310 or C158
- Extractor: Precision Machined, Heat Treated and Shot Peened Billet
- Gas Rings: Stainless Steel Mil-Spec
- O-Ring: Mil-Spec
- Carrier: Domestic Aircraft Quality 8620 Steel
- Gas Key: 4130 Steel
- Gas Key Screws: Grade 8 Properly Staked
- Cam Pin: Precision Machined 4140 Steel
- Retaining Pin: Precision bent and cut to length
- Firing Pin: Ground Hard Chrome 8740
- Assembled ready to drop in your DPMS GEN 1 style AR-10
- Will work with 6.5 Creedmore
|
|
|
BCG! 
