HOME > AR-10 >

AR-10 .308 DPMS GEN 1 80% FORGED LOWER RECEIVER - ANODIZED BLACK
AR-10 .308 DPMS GEN 1 80% FORGED LOWER RECEIVER - ANODIZED BLACK


 
RETAIL: $95.00
Our Price: $79.99

Stock Status: In Stock

Product Code: MAS00220304
Qty:

DESCRIPTION
 
AR-10 .308 DPMS GEN 1 80% FORGED LOWER RECEIVER - ANODIZED BLACK
  • Machined from 7075-T6 Forged Aluminum
  • Black Hardcoat Anodized Mil-STD-171 Type III
  • Precision Machined to Mil-Spec Tolerances

The operations left to be completed are:
  • Fire Control Group and Trigger Slot
  • Trigger and Hammer Pins
  • Safety Selector Hole
This is a not an FFL item. This is not a complete receiver and still requires machining to be completed.

ALL LAWS APPLY. IT IS THE RESPONSIBILITY OF THE BUYER TO UNDERSTAND ALL LAWS REGARDING PURCHASE AND OWNERSHIP OF THIS UPPER. WE STRONGLY URGE YOU TO CONTACT YOUR LOCAL FFL AND/OR THE ATF WITH ANY AND ALL QUESTIONS TO MAKE SURE YOU UNDERSTAND THE LAW BEFORE PURCHASING THIS ITEM.

RELATED ITEMS
16" .308 AR-10 BARRELED UPPER - MAS DEFENSE NERO 15" M-LOK RAIL - BALLISTIC ADVANTAGE BARREL 18" AR-10 .308 1x10 BALLISTIC ADVANTAGE TACTICAL GOVERNMENT MID-LENGTH BARREL - MODERN BABL308005M AR-10 DPMS 6 POSITION BUFFER TUBE - MIL-SPEC - KIT OPTIONS AVAILABLE AR-10 .308 BOLT CARRIER GROUP DPMS GEN 1 BCG - MELONITE NITRIDE
Our Price: $359.99
Our Price: $228.00
Our Price: $19.99
Our Price: $149.99
16" .308 AR-10 BARRELED UPPER - MAS DEFENSE NERO 15" M-LOK RAIL - BALLISTIC ADVANTAGE BARREL 18" AR-10 .308 1x10 BALLISTIC ADVANTAGE TACTICAL GOVERNMENT MID-LENGTH BARREL - MODERN BABL308005M AR-10 DPMS 6 POSITION BUFFER TUBE - MIL-SPEC - KIT OPTIONS AVAILABLE AR-10 .308 BOLT CARRIER GROUP DPMS GEN 1 BCG - MELONITE NITRIDE
16" AR-10 .308 1x10 BALLISTIC ADVANTAGE TACTICAL GOVERNMENT MID-LENGTH BARREL - MODERN BABL308003M
Our Price: $218.50
16" AR-10 .308 1x10 BALLISTIC ADVANTAGE TACTICAL GOVERNMENT MID-LENGTH BARREL - MODERN BABL308003M

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 51 CLICK HERE TO WRITE A REVIEW »

  0 of 0 people found the following review helpful:
 
4 of 5 Good, maybe not Great tho September 18, 2020
: Mchinegun Chuck from COLUMBUS, IN United States  
Shipping was fast and the product is as described.
I ordered 4 of these and will order more since I'm switching out all of my serialized receivers (where practical). That said, you should keep in mind that although you are buying an anodized lower, you're going to have to refinish it. There are a LOT of sharp edges/corners including the front of the mag-well, the inside and outside trigger guard and where the pistol grip meets the receiver there is a nice sharp corner. This leaves your middle finger riding a nice sharp edge with a nice sharp corner if not addressed. I guess they've been "Deburred" But, "Deburred" sharp edges are still sharp. In the field, you want nice rounded edges and to get that you're going to have to take off some material. On the up side there is plenty of material so, it won't be a problem. A little work with a Dremel followed by a nice coat of Dura-Coat/Cerakote and you'll be in business. Still at this price point, it's a good buy.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 September 10, 2020
: Lonnie Morris from Suffolk, VA United States  
First time using your company and so fari like the product

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 2x Lowers September 9, 2020
: from NY, United States  
Quality products, fair prices & very fast shipping during COVID + riots. Lucky to find anyone who will ship to NY. I would've bought more parts if they were in stock-very satisfied!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Nice piece September 8, 2020
: William Hunter from Black Creek, GA United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Quality products at great prices September 4, 2020
: Gavin Newsom from San Francisco  
I've come to rely on MAS Defense over the years as one of my staples for parts.
I've never had an issue with the quality as they source from the right manufacturers.
MAS Defense parts don't have burs, no excessive forge marks after sloppy machining, and aren't rushed out. The quality control has always been good, as far as my experiences are concerned.
Shipping is always fast and the only problems I've ever had are from USPS and not MAS Defense.
There are two variations of this lower that are found; the forged, which MAS carries, and billet, carried by other companies. Both are equally fine and really, if machined right and with decent quality control it doesn't matter.
The fit has been great and if you've milled an 80 in the past then you'll know there is nothing different about these.
I'm gonna say that you can get these elsewhere, and maybe a little cheaper, but speaking from experience, from MAS Defense these don't have burs and tool marks all over them. You can't go wrong.

Was this review helpful to you?

View All Customer Reviews